2007 Honda Odyssey
Mileage
160,659
Service Date
10/14/2025
Services Performed
- P0154- AIR FUEL RATIO SENSOR B2S1 HEATER MALFUNCTION
- VEHICLE STATE INSPECTION
- PERFORM FREE 35 MULTIPOINT INSPECTION W/ WORKSHEET
- CHANGE OIL AND FILTER LUBE CHASSIS WHERE APPLICABLE, CHECK AND FILL FLUIDS AND ADJUST TIRE PRESSURES
- OIL FILTER & ENGINE OIL DISPOSAL FEE
- OIL CHANGE STICKER & RESET MAINTENANCE REQUIRED LIGHT(S)
- CHECK & FILL ALL FLUID(S)
- FOUND CODES FOR DOOR BASE POSITION SWITCH ERROR. SWITCH IS INTEGRAL TO RIGHT REAR DOOR LATCH ASSEMBLY. NEED TO R&R LATCH ASSY AND RETEST FOR PROPER FUNCTION.
- TOOK FLUID SAMPLE AND FLUID IS DARK AND NEEDS TO BE FLUSHED AND FILLED, TEST DRIVEN FOR ISSUES. IF ISSUES REMAIN THEN A REFERRAL TO A TRANSMISSION SHOP WILL BE ENACTED.
- OXYGEN SENSOR – Remove & Replace – Each
- AUTOMATIC TRANSMISSION FLUID – Drain & Refill
- DOOR LATCH – Remove & Replace – Side,Rear
- AXLE SHAFT ASSEMBLY – Remove & Install or Remove & Replace – One Side – [NOTE: For Independent Suspension Type Axles, Axle Shaft Assembly consists of Axle Shaft, Boots and Joints.]
- R&R LICENSE PLATE LIGHTS AND 3RD BRAKE LIGHT
- RADIATOR HOSE – Remove & Replace – Both
- PERFORM COOLING SYSTEM FILL AND BLEED PROCEDURE WITH VACUUM ASSIST TOOL OR OTHER NECESSARY EQUIPMENT TO REMOVE AIR FROM COOLING SYSTEM.
- TIE ROD &/OR END – Remove & Replace – Inner,Both,w/o Steering Gear Removal – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replacing Inner Tie Rod
- 4 WHEEL ALIGNMENT (Includes checking tire pressures, dread depth & check front-end)
HARRY H. gave our service a 5 star review on 10/14/2025
